Glass Lined Distillation Tank manufacturer

Each product has its own working temperature,and glass lined distillation tank are no exception.Within a reasonable working temperature range,its performance is good.For enamel equipment,temperature not only affects the chemical reactions of the material,but also affects the service life of the equipment.So it is necessary to understand the working temperature of the glass lined distillation tank.Below,the glass lined distillation tank manufacturer will bring you detailed information:

Enamel reaction kettle is a product made by baking at 900 degrees and bonding enamel with steel plate after cooling.Due to the lower coefficient of linear expansion and elongation of enamel compared to steel plates,the deformation of enamel after cooling is smaller than that of steel plates,and enamel is constrained by steel plates to generate compressive stress.After the enamel production is completed,there is pre compressive stress in the enamel and pre tensile stress in the steel plate.Due to the relationship between prestress and coefficient of linear expansion and elongation,which are closely related to temperature,the working temperature of enamel pots has a significant impact on their use.If the stress generated by enamel exceeds its service stress due to excessive temperature changes,the enamel will be damaged.So the enamel layer of the glass lined distillation tank changes quickly under hot and cold conditions,making it easy to explode.
The temperature limit of the enamel kettle is 200 degrees,with a temperature shock of 110 degrees and a thermal shock of 120 degrees.During the feeding process,the difference between the material temperature and the kettle temperature is too large,and the strong steam and rapid cooling during the heating process can also cause the porcelain to explode.Therefore,the heating and cooling of the enamel kettle should be slow and uniform,and should be cooled in stages.
It is not difficult to see from the above content that the glass lined distillation tank has temperature limitations and cannot be used at very high temperatures.This situation occurs in a very special industry that can meet daily industrial needs,so it can be used with confidence.