China gate stirrer The working principle of a China gate stirrer is to provide power through an electric motor,which drives the mixing shaft and propeller to rotate inside the container after being decelerated by a reducer.Its basic structure mainly includes the following parts:
【2025/02/20】
Glass Lined Distillation Tank manufacturer Each product has its own working temperature,and glass lined distillation tank are no exception.Within a reasonable working temperature range,its performance is good.For enamel equipment,temperature not only affects the chemical reactions of the material,but also affects the service life of the equipment.So it is necessary to understand the working temperature of the glass lined distillation tank.Below,the glass lined distillation tank manufacturer will bring you detailed information:
【2025/02/19】
Glass lined vertical storage tank manufacturer The sealing failure of mechanical punch press mainly refers to the failure caused by factors such as corrosion,wear,equipment,heat loss,and operation.After disassembling the mechanical seal of the kettle,there were no scratches or wear on the sealing surface,eliminating the cause of physical damage to the sealing surface.Considering the presence of a large amount of crystals and scale inside the sealed chamber of the reaction vessel,combined with various manifestations of mechanical seal failure,it is determined that the crystallinity and corrosiveness of the transported medium are the main causes of seal failure.The common corrosion of reaction vessels is the corrosion of the contact parts with auxiliary sealing rings,mechanical seal dynamic rings,static rings,shaft sleeves,and static ring seats.Some corrosive materials can also cause special corrosion to metal shaft sleeves,dynamic rings,static ring seats,and sealing bodies.
【2025/02/18】
Impeller mixer factory The impeller mixer is generally used in various processes that require liquid mixing and reaction in experiments.Especially in laboratory environments,it has become an indispensable experimental equipment due to its efficient stirring ability and adaptability.
【2025/02/17】
Impeller mixer price The impeller mixer price varies depending on factors such as model,material,specifications,and manufacturer.The following is a detailed analysis of the price of impeller mixers:一、Price RangeThe price range of impeller mixers is quite wide,ranging from a few hundred yuan to tens of thousands of yuan.The specific price depends on the specific configuration and purpose of the mixer.
【2025/02/15】
China Glass Lined Warm Sleeve China glass lined warm sleeve, also known as enamel tower section, is an important component of enamel equipment. Attention should be paid to the following matters during use:1. Avoid overload operation: glass lined warm sleeves should be used strictly in accordance with operating procedures to avoid overload operation and prevent equipment damage or safety accidents.
【2025/02/14】
Stainless steel and carbon steel tube heat exchanger Stainless steel and carbon steel tube heat exchangers are common heat exchange equipment in industry, each with unique characteristics and applicable scenarios.
【2025/02/13】
China Enamel reaction tank China enamel reaction tank require heat exchange facilities during use.However,the heat transfer method inside the reactor is limited by the structure of the reactor body,and the heat transfer area is limited by the ordinary jacket outside the reactor.The larger the diameter of the equipment,the smaller the heat transfer area of the kettle body,but the amount of reactants does increase.At this time,it will bring great difficulties to work.At this point,the heat transfer area needs to be considered,and the amplification effect cannot be ignored.Therefore,currently in industry,the main method for enamel reaction tank is heat exchange.
【2025/02/12】
Enamel glass thermowell Enamel glass thermowell is a widely used equipment accessory in chemical, pharmaceutical and other industries, mainly used for measuring and controlling the temperature inside containers such as reaction vessels. The structural design of the enamel glass thermowell is precise, mainly including the following key parts:
【2025/02/11】
China Enamel reaction tank manufacturer Enamel reaction tank is a large corrosion-resistant equipment that has good reaction effects on various chemical media.In order to fully leverage its advantages in use,it is necessary to ensure its stability within a reasonable range.Today,let's take a look at the production process of the China enamel reaction tank manufacturer.
Address：Room 1202, Detaitang Building, No. 118 Huaguang Road, Zhangdian District, Zibo, Shandong
WhatsApp：+8613386433135
Tel： +8613386433135