Gate stirrer factory

When choosing the lubricating oil for a gate stirrer, it is necessary to comprehensively consider the working environment, load conditions, speed requirements, and the performance characteristics of the lubricating oil itself. Here are some suggestions from the gate stirrer factory to help you choose the appropriate lubricant:

1. Understand the working environment of the gate stirrer

Temperature range: Determine the temperature range during the operation of the mixer in order to select lubricating oil with appropriate viscosity index, ensuring good lubrication effect at different temperatures.

Humidity and corrosiveness: If the working environment of the mixer has high humidity or corrosive media, lubricating oil with anti-corrosion properties should be selected.

2. Consider the load situation of the gate stirrer

Load size: For gate stirrers with larger loads, it is necessary to choose lubricating oil with stronger load-bearing capacity to reduce wear and extend equipment life.

Load type: Select lubricating oil with corresponding anti-wear performance based on the load type that the mixer is subjected to (such as impact load, continuous load, etc.).

3. Pay attention to the speed requirements of the gate stirrer

High and low speed: High speed mixers require the selection of lubricating oil with lower viscosity to reduce frictional resistance and power loss; Low speed mixers can choose lubricating oil with slightly higher viscosity.

4. Performance characteristics of lubricating oil

Viscosity index: Choose lubricating oil with an appropriate viscosity index to ensure stable lubrication performance at different temperatures.
Antioxidant properties: Good antioxidant properties can extend the service life of lubricating oil and reduce the frequency of replacement.
Wear resistance: Choose lubricating oil with excellent wear resistance to reduce the wear and failure rate of the components of the gate stirrer.

Cleanliness: Choosing lubricating oil with good cleaning performance can effectively remove impurities and dirt inside the mixer, keeping the equipment clean and running normally.

5. Recommended lubricant types

For gate stirrers, commonly used lubricating oil types include industrial gear oil, hydraulic oil, etc. The specific type of lubricating oil to be selected needs to be comprehensively considered based on the actual situation of the mixer. For example, for the reducer part, GB/T5903-1986 medium pressure gear oil N220 or N320 can be selected, and the appropriate viscosity grade can be chosen according to the ambient temperature; For hydraulic systems, it is possible to choose the appropriate type of hydraulic oil for the system.

6. Precautions

Follow manufacturer's recommendations: When selecting lubricants, it is best to refer to the recommendations and instructions of the gate stirrer manufacturer to ensure compatibility between the selected lubricant and the equipment.
Regular replacement: According to the usage of lubricating oil and the manufacturer's recommendations, regularly replace the lubricating oil to maintain the good lubrication condition of the equipment.
Storage conditions: Lubricating oil should be stored in a dry, clean, and well ventilated environment, avoiding direct sunlight and high temperatures to avoid affecting its performance and service life.
In summary, the selection of lubricating oil for a gate stirrer requires comprehensive consideration of multiple factors. By selecting and using lubricating oil reasonably, the normal operation and extended service life of the mixer can be ensured.